Results 1 to 3 of 3

Thread: 1301 Mark II front seat

  1. #1
    bobbowie Guest

    Default 1301 Mark II front seat

    How is the bottom of the front seat secured to the seat frame on a 56 Mark II?
    Last edited by Pat Marshall; 09-04-2021 at 08:06 AM.

  2. #2
    Join Date
    Jun 2017
    Location
    Aberdeen, Scotland UK
    Posts
    573

    Default

    It isn't secured, it simply sits inside the frame. Try lifting the front edge up and you should be able to wriggle it up until it lifts out completely then pass sit out of one of the doors. This will then expose and give access to the relays and motors.

    Hope this helps,
    Mark Norris
    C56G3186
    1963 Aston Martin DB4 Series V Vantage
    1951 C-type Jaguar (alloy replica)
    1934 Lagonda M45 Tourer

  3. #3
    Join Date
    Jul 2009
    Location
    Farmington Hills, MI
    Posts
    4,715

    Default

    Be very careful around the two larger red wires. They are constantly hot and could cause some damage if shorted to the frame or the floor. Best to disconnect the battery.
    Barry Wolk
    Farmington Hills, MI

    C5681126

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •