Quote Originally Posted by Barry Wolk View Post
The rear brakes on both sides look completely unused. I'm betting stuck cylinders.

[ATTACH=CONFIG]23692[/ATTACH

Milstead, whats the best way to get the bushings out of the GM a-arms? o you press the shaft out, forcing the pushing out, or do you burn the rubber and center ferrule out and cut the bushing?

IMG_2298.jpg
An air hammer is my best friend concerning bushings. What I do is hammer on the flanges to push the bushing out of the A arm. Then to install, a bushing press or a BFH and an old socket or a piece of pipe and hammer into place.