Good morning all,
Any photos on how the hard vacuum pipe runs/attaches from the vacuum pump to the washer bottle.
I dont seem to see anything
Thanks
Good morning all,
Any photos on how the hard vacuum pipe runs/attaches from the vacuum pump to the washer bottle.
I dont seem to see anything
Thanks
Last edited by JohnC; 06-10-2022 at 06:42 AM.
John Mush
C56A1836
The hard pipe that runs from the vacuum pump, then via two clips on the front of the sump, terminates below the washer bottle. From there the connection is via a black rubber vacuum hose to the top of the washer bottle assembly. Here is a photo from 3186 (its the grey pipe, the copper pipe runs off to the wiper motor (to synchronize the waster jets?));
Washer Bottle and connections.jpg
Last edited by Mark Norris; 06-10-2022 at 06:19 AM.
Mark Norris
C56G3186
1963 Aston Martin DB4 Series V Vantage
1951 C-type Jaguar (alloy replica)
1934 Lagonda M45 Tourer
It presses into the pump and simply sits in a clip attached to the left side of the timing chain housing, facing the engine. From there it goes to a T to the washer bottle and the hard pipe on the chassis leading to the T that goes to goes into the cabin and branches to the vacuum motor.
Barry Wolk
Farmington Hills, MI
C5681126